How do I unlock my Honeywell thermostat touch screen?

How do I unlock my Honeywell thermostat touch screen?

Tap and hold the blank key in the bottom center of the keypad till the display changes. Change the digits on the left side to ‘0670’, using the up and down keys in the middle of the screen. Change the digit on the right-hand side to 0 with the help of the up/down keys. Tap “Done” on the screen to complete the unlock.

How do you unlock a Honeywell T4 thermostat?


  1. From the locked home screen, press the center button.
  2. Enter the passcode. The default passcode when the Honeywell T4 Pro is partially or fully locked is 1234.
  3. Press the Select button. The thermostat will now be unlocked.

How do you unlock a White Rodgers thermostat?

Force the thermostat to unlock if you do not know the keypad lockout code by touching the “Menu” button and holding your finger there for approximately 20 seconds. When you first touch the “Menu” button it will disappear. Keep your finger in the same location until the thermostat unlocks.

How do you bypass a locked thermostat?

To completely bypass all programming, simply press the HOLD button once. HOLD will appear in the display. For as long as HOLD appears in the display the thermostat will not change the set-point temperature unless you adjust it yourself with the up or down arrow buttons.

How do I manually override my Honeywell thermostat?

Override a Home Honeywell Thermostat Keep the display button depressed and let go of the off button. While still holding the display button, quickly press the up arrow button. Release all depressed buttons at the same time. This should put the thermostat in a manual mode.

How do I unlock my Emerson thermostat?

To unlock the Emerson thermostat, press the MENU key on the thermostat. From the settings menu displayed on the screen, use the navigation keys to select the thermostat lock option. You will see the UNLOCK option in the lower right side of the display.

How do I reset my Honeywell touchscreen thermostat?

To reset your Honeywell Thermostat, switch it off, remove the batteries, and put them back in reverse polarity: negative terminals facing positive. After 5 seconds, reinsert them the right way.

How do you reset a White Rodgers thermostat?

The most common method of resetting the White-Rodgers Thermostat is by pressing down on the Up or Down arrow and the Time button at the same time until the display goes blank on your White-Rodgers Thermostat. This usually takes 15 seconds.

How do you remove a thermostat lock?

To turn the lock On, press the Up and Down arrow keys together for approximately 3 seconds. The Key icon will turn on in the lower right hand corner of the screen. This will prevent tampering or accidental button presses. To turn the lock Off, long press the Up and Down arrow keys again.