How strong is a Ford AOD transmission?
How strong is a Ford AOD transmission?
With some cunning piracy from the later AODE and the Ford parts catalog, plus a healthy dose of valvebody reengineering, Bertrand has created a transmission that’s as beefy as a Turbo 400 and can support more than 1,200 hp-enough to handle all but the hairiest race applications.
How does a Ford AOD transmission work?
The AOD is a true hydromechanical 4-speed automatic transmission controlled by a manual shifter and throttle valve (TV) cable. They also have a throttle-controlled kickdown linkage, which works with the vacuum modulator to control shift-points mostly for wide-open throttle (WOT) downshift.
How can you tell if a transmission is AOD?
The AOD transmission can be identified in several ways. Its prominent 14-bolt pan is probably the easiest way. The pan is basically square but the back two corners are tucked in a little tighter than the front corners making the pan look like home plate with the front point cut off.
How do you adjust the cable on a Ford AOD transmission?
3:36Suggested clip 109 secondsFord AOD TV cable adjustment – YouTubeYouTubeStart of suggested clipEnd of suggested clip
How do you hook up a transmission in a Ford AOD?
14:53Suggested clip · 85 secondsHow to Install and Adjust Ford AOD TV Cable Part 2 | Curts Corner …YouTubeStart of suggested clipEnd of suggested clip
Does a c6 need a kickdown?
You won’t hurt the C6 by running without a kickdown (or a C4 for that matter) if that’s what your question was. Just downshift manually.
What does a c6 vacuum modulator do?
Ford, 1966-72 C4/C6 Adjustable Vacuum Modulator, Screw-in, White Stripe. The vacuum modulator is a vital component of automatic transmissions. It tells the transmission what kind of load is being put on it, allowing the transmission to react with the proper line pressures and shift points.
Does a c4 transmission need a kickdown cable?
You can drive them without a kickdown. They have a modulator and a governor. You can manually shift it down. You can install a shift kit.
What is Ford kickdown?
A: Kickdown is a downshift in an automatic transmission triggered when the driver pushes the car’s accelerator to the floor.
What does kickdown mean?
: a change to lower gear in an automotive vehicle also : the manually operated or automatic device for making such a change.
What does kickdown linkage do?
One component that helps both drive systems communicate is the kickdown cable. This device helps the engine relay information on revolutions per minute (RPM) to the automatic transmission and essentially tells it that it’s time to shift gears.
Is a kickdown cable necessary?
In fact, if you don’t mind downshifting manually with the shift lever when passing, there’s really no need for a functional kickdown cable or switch at all. On transmissions designed around a TV cable, its presence is mandatory.
How does a kickdown switch work?
Downshifting with a Kickdown Switch Once activated, the kickdown switch will downshift into the lowest permissible gear based on a car’s current road speed so it could use the full power reserves of its engine.
Does a Turbo 400 have a kickdown cable?
Instead of a linkage or cable, the TH400 uses an electrical switch that is most often mounted on the carburetor. The factory used a switch located on the carburetor or on the throttle linkage under the dash that at WOT supplied voltage to the transmission.
Can you run a 700r4 without a TV cable?
If the transmission is in park you can run the engine without worrying about the TV connection.
What year is the best 700r4 transmission?
What does a shift kit do 700r4?
In short, an automatic transmission shift kit modifies the transmission’s shift timing in order to dramatically increase shift firmness and durability of the transmission components. Transmission shift kits can reduce this overlap time while improving the overall shifting action.
What does the TV cable do on a 700r4?
The TV cable on the 700R4 and 200-4R transmissions controls line pressure, shift points, shift feel, part throttle downshifts, and detent (full throttle) downshifts. So if the TV cable is not adjusted properly, it can cause numerous transmission problems.
Is a 4l60 the same as a 700r4?
In 1990, GM decided to code and renamed their transmissions, the 700R4 is best described as a 4 speed, longitude transmission rated for vehicles around 6000 lbs. It was this information that was used to change its name to 4L60; therefore, a 700R4 and 4L60 are the same transmission.
How much HP can a 700r4 handle?
The Street/Strip 700R4 is good for about 550 hp maximum, but with the HD input drum it is good for about 625 hp max. Add another $240.00 for the input drum. I give a one year warranty with all my transmissions & torque converters.